Marine Salvage Airbags
Marine salvage airbags is also called ship launching airbags, it is another application of ship launching marine airbags for shipwreck, floating bridge, dock construction rescue and remove of wrecked ships in the salvage and rescue industry. Es otra aplicación del lanzamiento de bolsas de aire marinas para naufragios, puentes flotantes, rescate en la construcción de muelles y remoción de naves naufragados en la industria de rescate y rescate.
Marine salvage airbags can work as pontoons for supporting docks and other floating structure. Marine salvage tubes perform also well for pipe-laying and other underwater concrete construction projects to provide extra buoyancy. Marine salvage airbags are much small in sizes while deflated with lighter weight which is easily to 
be transported and deployed. Salvage tubes could be applied vertically to bring the sunken ships out of deep water. While the boat is suspended near the surface, they can be slung under the boat with one end on each side to raise the boat high enough out of the water to pump out. In shallow water, two marine airbags can be slung together, one on each side of the boat, like salvage pontoons. They can also be used as rollers for moving beached boats back into water, just like ship launching airbags. Inner pressure of airbag can be 0.3Mpa, water depth up to 30 meters around.
Features and Advantages
1. Heavy-duty Special Synthetic-tire-cord-rubber-dipped layers
Ronsen marine salvage airbags ( salvage tubes ) are made with special synthetic-tire-cord layers which are superior pressure resistant comparing with PVC marine salvage airbags.
2. Higher-Pressure Design
Salvage tubes/airbags has maximum working pressure of 0.25 Mpa, that’s to say Ronsen rubber salvage pontoon could be used under water 25 m ~60 m water depth, basically upon clients’ request.
3. Holistic Screw Type Enlacing Salvage Airbags
Our salvage marine airbags is a entire enclosed cylindrical tube with two cone heads. It is produced by Holistic Screw Technology which is much more stronger than RF welded salvage airbags.
4. Equipped with full set of salvaging fittings
Each Ronsen marine salvage airbag is equipped with nylon straps and shackles with 6 : 1 safety ratio.
Specification of Marine Salvage Airbags
Rubber marine salvage airbags can be supplied in customized sizes, our standarded dimension include dia. 1.0m,1.2m,1.5m,1.8m,2.0m,2.5m,3.0m, with effective length from 5m~24m around. Each size provide an buoyancy.
